NOTE: The product photo shown in this listing is our 5 ton Commercial Water Chiller. Our 2 ton chiller will look slightly different with a smaller compressor on top of the unit.
2 Ton Water Chiller
24,000 BTU/hr
1.5″ Slip Connections
Copper Heat Exchanger (Titanium upgrade optional)
208 – 240 Volts / 17.7 Amps / Single Phase
245 Pounds
34”W x 47”D x 50”H
Frame constructed with 304 Stainless Steel
Outdoor rated / pad mount ready
1 Year Product Warranty
Proudly made in the USA
60,000 BTU/hr
5 TON
1.5″ Slip Connections
Copper Heat Exchanger (Titanium upgrade optional)
208 – 240 Volts / 35.6 Amps / Single Phase
333 Pounds
34”W x 47”D x 63”H
Frame constructed with 304 Stainless Steel
Outdoor rated / pad mount ready
1 Year Product Warranty
Proudly made in the USA
Our Commercial Water Chiller comes on a stainless steel frame. The units come with a built in flow switch to disable the chiller in the event of a pump failure. The units also come with a copper heat exchanger which is suitable for use in most applications. A titanium upgrade is optional. Copper heat exchangers aren’t recommended for use in a closed loop aquarium setup because toxic levels of copper can build up in water which is being used for long periods of time. The use of titanium = Reef Tank Safe! If your application will be negatively affected by the use of copper, we suggest our titanium upgrade option.
NOTE: The product photo shown in this listing is our 5 ton Commercial Water Chiller. Our 2 ton chiller will look slightly different with a smaller compressor on top of the unit.
2 Ton Water Chiller
24,000 BTU/hr
1.5″ Slip Connections
Copper Heat Exchanger (Titanium upgrade optional)
208 – 240 Volts / 17.7 Amps / Single Phase
245 Pounds
34”W x 47”D x 50”H
Frame constructed with 304 Stainless Steel
Outdoor rated / pad mount ready
1 Year Product Warranty
Proudly made in the USA
60,000 BTU/hr
5 TON
1.5″ Slip Connections
Copper Heat Exchanger (Titanium upgrade optional)
208 – 240 Volts / 35.6 Amps / Single Phase
333 Pounds
34”W x 47”D x 63”H
Frame constructed with 304 Stainless Steel
Outdoor rated / pad mount ready
1 Year Product Warranty
Proudly made in the USA
Our Commercial Water Chiller comes on a stainless steel frame. The units come with a built in flow switch to disable the chiller in the event of a pump failure. The units also come with a copper heat exchanger which is suitable for use in most applications. A titanium upgrade is optional. Copper heat exchangers aren’t recommended for use in a closed loop aquarium setup because toxic levels of copper can build up in water which is being used for long periods of time. The use of titanium = Reef Tank Safe! If your application will be negatively affected by the use of copper, we suggest our titanium upgrade option.
Our Commercial Water Chiller comes on a stainless steel frame. The units come with a built in flow switch to disable the chiller in the event of a pump failure. The units also come with a copper heat exchanger which is suitable for use in most applications. A titanium upgrade is optional. Copper heat exchangers aren’t recommended for use in a closed loop aquarium setup because toxic levels of copper can build up in water which is being used for long periods of time. The use of titanium = Reef Tank Safe! If your application will be negatively affected by the use of copper, we suggest our titanium upgrade option.
Pump and Controller Recommendation
Pump Recommendation: Danner Magnetic Drive 2400gph – 3600gph. Other pumps may be acceptable for use however they often apply more than 10 psi to the chiller. If you’re using a pool/spa pump or any other pump rated in horsepower please talk with our tech support first, most pumps rated in HP would be capable of pressures that could damage the chiller. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.
Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.
Our Commercial Water Chiller comes on a stainless steel frame. The units come with a built in flow switch to disable the chiller in the event of a pump failure. The units also come with a copper heat exchanger which is suitable for use in most applications. A titanium upgrade is optional. Copper heat exchangers aren’t recommended for use in a closed loop aquarium setup because toxic levels of copper can build up in water which is being used for long periods of time. The use of titanium = Reef Tank Safe! If your application will be negatively affected by the use of copper, we suggest our titanium upgrade option.
Pump and Controller Recommendation
Pump Recommendation: Danner Magnetic Drive 2400gph – 3600gph. Other pumps may be acceptable for use however they often apply more than 10 psi to the chiller. If you’re using a pool/spa pump or any other pump rated in horsepower please talk with our tech support first, most pumps rated in HP would be capable of pressures that could damage the chiller. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.
Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.
2 Ton: 24,000 BTU/Hr
5 Ton: 60,000 BTU/Hr
1 Year Product Warranty
Proudly made in the USA
2 Ton: 24,000 BTU/Hr
5 Ton: 60,000 BTU/Hr
1 Year Product Warranty
Proudly made in the USA
Penguin Chillers
Penguin Chillers Commercial Water Chillers
Couldn't load pickup availability
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c1.jpg?v=1716320806&width=1445)
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c2.jpg?v=1716320810&width=1445)
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c3.jpg?v=1716320813&width=1445)
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c4.jpg?v=1716320817&width=1445)
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c5.jpg?v=1716320820&width=1445)
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c6.jpg?v=1716320825&width=1445)
![Penguin Chillers Commercial Water Chillers](http://backyardinnn.com/cdn/shop/files/c7.jpg?v=1716320828&width=1445)